Grundig GEBM19301BC Installationsanleitung Seite 7

Placing and fixing the product (Figure 5-6)
• Place the appliance on the furniture, centered with two or more people.
• If your product is equipped with a telescopic rail, a slope of at least 0,3 degrees towards
the back of the oven must be given for the telescopic rails to work properly. For this, after
placing the product on the furniture, place the spirit level on the telescopic rail as shown in
figure 5 and make sure that the angle of inclination towards the back of the oven is at least
0,3 degrees.
• Fix the product to the furniture using the screws provided. (Figure 6)
• At the end of the installation, check that the screws are properly tightened and that the
product is firmly fixed. If the product is not installed in accordance with the instructions and
the screws are not properly tightened, there is a risk of tipping during use.
min. 0,3
5
Final check
• After installation, turn on the mains supply.
• Read the user manual for the first use of the product.
• Check product functions.
Removing the product
• Disconnect the product from the mains supply.
• Unscrew the fastening screws.
• Lift the product lightly with two or more people and take it out completely.
0
min.5
6
min.5
7