Grundig GEBM19301BC Installationsanleitung Seite 3

EN - Safety instructions
• Product must be installed by a qualified person in accordance with the regulations in force.
The manufacturer shall not be held responsible for damages arising from procedures
carried out by unauthorized persons which may also void the warranty.
• Preparation of location and electrical installation for the product is under customer's
responsibility.
• The product must be installed in accordance with all local electrical regulations.
• Before installing the product, remove all the materials and documents in it and visually
check if the product has any defects on it. If so, do not have it installed.
• The product is heavy, carry the product with at least two people.
• The door and/or handle must not be used for lifting or moving the appliance. Use the
lifting spaces on both sides of the product (figure 1). Always wear protective gloves during
transport and installation.
• Disconnect electrical connections in the area to be installed before installation.
• The surfaces of the furniture that the oven is to be installed in must be heat-resistant (100
°C minimum).
• Make sure the furniture is fixed before installing the product.
• Do not install heat insulation strips inside the interior of the furniture that the oven is to be
installed in.
• The appliance must not be installed behind a decorative door in order to avoid overheating.
• The dimensions given in the installation diagrams are in mm.
1
2 0
572
3