Herunterladen Diese Seite drucken

Grundig GEBM19301BC Installationsanleitung Seite 6

Vorschau ausblenden Andere Handbücher für GEBM19301BC:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

  • DEUTSCH, seite 8
• If the product will be connected directly to the supply power: If it is not possible to
disconnect all poles in the supply power, a disconnection unit with at least 3 mm contact
clearance (fuses, line safety switches, contactors) must be connected and all the poles of
this disconnection unit must be adjacent to (not above) the product in accordance with IEE
directives. Failure to obey this instruction may cause operational problems and invalidate
the product warranty.
• Additional protection by a residual current circuit breaker is recommended.
If the product is produced with cable and plug
• Your product is produced with mains cable and plug. Connect the plug of your product to a
grounded outlet and make the electrical connection.
If the product is produced with cable and without plug
• Connect the cord of product to supply power as identified below:
- Brown/black cable = L (Phase)
- Blue cable = N (Neutral)
- Green/yellow cable = (E)
If the product is produced without cable and plug
A power cable that it is defined in the technical table home must be connected to product
by following the instructions. Power cable must not be longer than 2 m because of safety
reasons.
• Open the terminal block cover with a screwdriver.
• Insert the power cable through the cable clamp below the terminal and secure it to the main
body with the integrated screw on cable clamping component.
• Connect the cables according to the supplied diagram.
- N = Neutral (Blue)
- L = Live-Phase (Brown/black)
- E = Ground
- C =Cable clamp
• After completing the wire connections, close the terminal block cover.
• Connect the power cable to supply power by routing it so that it will not contact the product
and get squeezed between the product and the wall.
Prevention against possible fire risk!;
• Ensure all electrical connections are secure and tight to prevent risk of arcing.
• Do not use damaged cables or extension cables.
• Ensure liquid or moisture is not accessible to the electrical connection point.
6
(Ground)
(Green/yellow)

Werbung

loading