Troubleshooting; Possible Cause; Disposal And Recycling - Scheppach HTH250 Original Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für HTH250:

Originalanleitung (92 Seiten)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

Inhaltsverzeichnis

Verfügbare Sprachen

• Dispose of remaining fuel in an environmentally

compatible manner.

• Operate the engine until the carburettor is empty.

Transport

To transport the device stop the engine and wait until

the cutting device does not longer move. Attach the

protective cover.

Carry the device with the front handle.

When transporting the device within a car put it in

the boot or on a separate loading area. Secure the

hedge trimmer against tipping over, damages and

fuel spillage.

13. Troubleshooting

Fault

Hedge trimmer does not

work.

Hedge trimmer cuts with

interruptions

Engine is running, cutting

device does not move

Cutting device gets hot

 www.scheppach.com /  service@scheppach.com /  +800 4002 4002

Possible cause

• No fuel supply

• Fault in the fuel line

• Fuel filter clogged

• Spark plug defective

• Carburettor defective

• Internal fault.

• ON / OFF switch defective.

• Cutting device blocked

• Internal fault.

• Clutch defective

• Missing lubrication => friction

• Not enough play

• Cutting blades are blunt

12. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective

components must be disposed of as special waste.

Ask your dealer or your local council.

Remedy

• Check the fuel quantity

• Check the fuel line for kinks or damages

• Clean/replace the fuel filter

• Replace the spark plug