Endress+Hauser Promag 500-digital Einbauanleitung Seite 4

EA01146D
1 Overview of spare part sets
The Installation Instructions apply to the following spare part sets:
Order code Original spare part set
71323080 Cover set, Proline 300, non-Ex
71323081 Cover set, Option A, Proline 300, 500, Ex
71323082 Cover set, Option B, Proline 300, 500, Ex
71323083 Module holder cover set, Proline 500 digital
71368488 Cover set, Option A, Proline 300, non-Ex
71368489 Cover set, Option B, Proline 300, non-Ex
• The order number of the spare parts set (on the product label on the package) can
differ from the production number (on the label directly on the spare part)!
• You can find the order number of the relevant spare parts set by entering the
production number of the spare part in the spare parts search tool.
• We recommend that you keep the Installation Instructions and packaging together at
all times.
4
Content
1 × connection compartment cover, 1 × support
for cover, pre-assembled, non-Ex,
2 × screw M4×10 Torx
1 × connection compartment cover 1 × support for
cover, pre-assembled, Exd, 2 × screw M4×10 Torx
1 × connection compartment cover, 1 × support
for cover, pre-assembled, Exd,
2 × screw M4×10 Torx
1 × cover for electronics printed circuit board
holder, 1 × cover for power outlet,
1 × cover for I/O
1 × connection compartment cover, 1 × support
for cover, HART, pre-assembled, non-Ex,
2 × screw M4×10 Torx
1 × connection compartment cover, 1 × support
for cover, Ethernet, pre-assembled, non-Ex,
2 × screw M4×10 Torx
Endress+Hauser