PARTS LIST
The following parts should be found in the box:
•
Installation Manual
•
Homologation certificate/ compliance documents if applicable
•
Warranty
•
Fitting material
•
Muffler and pipes
Detailed list of parts can be found on the Akrapovič website (please use the QR code on the front page or look for
"Schematic view" in the respective product page on www.akrapovic.com).
REMOVAL OF STOCK EXHAUST SYSTEM:
The process of uninstalling the original exhaust system may vary depending on the existing exhaust system.
Please follow the original exhaust system manufacturer's instructions for uninstalling the original exhaust system.
If you for any reason decide otherwise, please note that any information provided in this respect herein should
be considered as general information provided for your convenience only. Akrapovič shall not assume any
liability or responsibility with regard to uninstalling your existing exhaust system, warranty coverage of such
exhaust system or vehicle or their further fitness for use.
In case your Akrapovič exhaust system may not be used on certain roads or under certain conditions,
please keep the stock or other exhaust system that you can use in such circumstances legally.
ECU fuel-mapping enrichment
Please make sure that any ECU fuel-mapping enrichment is compliant with relevant laws, including state and
federal, where applicable. Akrapovič makes no representation or warranty with regard to legal compliance,
noise or gas emissions in case of ECU fuel-mapping enrichment.
Evolution
For perfect performance, throttle response and durability of the engine, the Akrapovič Evolution exhaust system
should be used in combination with ECU fuel mapping enrichment provided by a professional, to avoid severe
engine damage or breakdown, which could result in injury.
5 / 28
Tools & equipment
•
Torx 30 wrench
•
Torx 45 wrench
•
T-handle 10 swiveling mm wrench
•
T-handle 3 mm hexagon wrench
•
T-handle 4 mm hexagon wrench
•
T-handle 5 mm hexagon wrench
•
T-handle 6 mm hexagon wrench
•
Combination 8 mm wrench
•
Combination 10 mm wrench
•
Combination 12 mm wrench
•
Combination 13 mm wrench
•
Combination 17 mm wrench
•
Socket 10 mm
•
Socket 13 mm
•
Small flat screwdriver
•
Spring puller