Akrapovic Evolution Montageanleitung Seite 21

10. Slide the link pipe onto the collector's outlet and attach the spring (F 31).
IMPORTANT: make sure, that spring pull the link pipe all the way onto the collector – use rubber mallet if
necessary to tap the connection into place!
INSTALLATION TIP: coat the interior side of the input bush of the titanium link pipe with Akrapovič ceramic
anti-seizing grease (white tube).
11. Unscrew marked bolts on both sides and remove passenger's foot rests off the motorcycle (F 32).
IMPORTANT: be careful not to damage any part of the motorcycle during this process!
21 / 28
F 31
F 32