JUNO JGVX605E1 Benutzerinformation Seite 15

9. DAILY USE
1. Open the water tap.
2. Press and hold
activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the programme
is complete.
9.1 Using the detergent
A B
C
CAUTION!
Only use detergent specifically designed
for dishwashers.
1. Press the release button (A) to open the
lid (C).
2. Put the detergent (gel, powder or tablets)
in the compartment (B).
3. If the programme has a prewash phase,
put a small quantity of detergent on the
inner part of the appliance door.
4. Close the lid. Make sure that the lid locks
into position.
For information about the detergent
dosage, refer to the manufacturer's
instructions on the packaging of the
product. Usually, 20 - 25 ml of gel
detergent is adequate for washing a load
with normal soil.
until the appliance is
The upper ends of the two vertical
ribs inside the compartment (B) indicate
the maximum level for filling the
dispenser with gel (max. 30ml).
9.2 How to select and start a
programme
1. Press the button dedicated to the
programme you want to set.
The light related to the button flashes.
2. Activate Extra power if desired.
3. Close the appliance door to start the
programme.
9.3 How to activate Extra power
1. Select a programme.
2. Press Extra power.
The light related to the button is on.
Extra power is not a permanent
option and must be activated every time
before you start a programme.
It is not possible to activate or
deactivate Extra power while a
programme is running.
Activating Extra power increases the
water and energy consumption as well as
the programme duration.
9.4 How to select and start the
programme AUTO
1. Press AUTO.
The light related to the button is on.
2. Close the appliance door to start the
programme.
The appliance senses the type of load and
adjusts a suitable wash cycle.
ENGLISH 15