Minute Minder - Falcon Excel 110 Gebrauchsanleitung

To set the time of day
A Timer knob
When the clock is first connected, the display flashes
( ) and ( ) alternately.
To set the time, turn and hold the Timer knob to the clock
symbol ( ) and at the same time turn the Adjusting
knob left or right until the clock shows the time of day.
Remember this is a 24-hour clock. Let go of the Timer
knob and it will spring back to the vertical, oven manual
setting.

Minute Minder

Turn the Timer knob to the right to the ( ) minute minder
setting - it should click into position:
Use the Adjusting knob to set the time you need as below:
You can either turn the knob back to the vertical manual
setting ( ) to keep an eye on the time of day, or leave it in
the ( ) minute minder position as the time ticks down.
To stop the beeper when it sounds, turn the Adjusting
knob anticlockwise.
To stop the left hand oven at a
specific time of day
Turn the Timer knob to the (
B Adjusting knob
) position.
Use the Adjusting knob to set the time at which the oven
is to stop. You can set the oven to turn off at any time over
the following 24-hour period. AUTO shows in the display:
Turn the Timer knob to the bottom AUTO setting. Once
the set time is reached, the beeper sounds. Turn the Timer
knob to the vertical ( ) to return to manual cooking.
To start and then stop the left hand
oven using the Timer
Before you set the clock, decide on both the 'cook time' ,
which is the period of time you want the oven to cook,
and the 'stop time' , which is the time of day at which you
want the oven to stop cooking.
You cannot set a start time directly - this is set
automatically by a combination of the 'cook time' and
'stop time' .
Turn the Timer knob to the (
Use the Adjusting knob to set the 'cook time' you need:
Turn the Timer knob to the (
show the current time of day plus the 'cook time' you just
set. Use the Adjusting knob to set the 'stop time' you need:
The 'stop time' is displayed, followed by 'AUTO' . Set the
oven(s) to the cooking temperature you need. Turn the
Timer knob to the AUTO setting.
7
) position:
) position. The display will