Set of DMX LED Spotlights
These instructions are intended for installers of the
unit and for users with basic knowledge in DMX
control. Please read the instructions carefully prior
to operation and keep them for later reference.
All operating elements and connections de -
scribed can be found on the fold-out page 3.
Contents
1
2
Safety Notes . . . . . . . . . . . . . . . . . . . . . . . 11
3
Applications . . . . . . . . . . . . . . . . . . . . . . . 11
4
5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 12
6
10
1
Operating Elements
and Connections
1 Mounting/setscrew, one for each spotlight
On the upper side of the controller, additional
threaded holes are available; if required,
remove the screws and fasten the spotlight
there.
2 Setscrews for vertical inclination of the spotlight
3 Support for the mains fuse
Always replace a blown fuse by one of the same
type.
4 Mains jack for connection to a socket (230 V/
50 Hz) via the mains cable provided
5 Connection POWER LINK to provide an addi-
tional unit with power
6 Control SENSITIVITY to adjust the microphone
sensitivity for music-controlled light effects
7 Microphone for music-controlled light effects
8 XLR chassis plug DMX IN: DMX signal input for
connection of a light controller or connection to
the DMX signal output of another DMX-con-
trolled unit
9 XLR jack DMX OUT: DMX signal output for con-
nection to the DMX input of another DMX-con-
trolled unit
10 Connection for the remote control supplied (13)
11 Display
12 Control buttons
Button MENU to select the operating mode
Buttons
and
Button ENTER to call up the setting options and
to save a setting
13 Remote control with two foot switches
Switch PROGRAMS to select one of the 12
automatic light programs or one of the 7 lighting
colours
Switch BLACKOUT to switch the light off and on
to change a setting