Werbung
Failure
(1) The pump does not operate.
®
(2) Turbelle
stream 6080 stops
in regular intervals (approx.
every 10 minutes) and runs
hot.
(3) The running noise is too
loud.
52
Cause
(a)After a longer stop period,
deposits have „stuck up"
the bearing sections of the
pump.
(b)Motor sections, such as
bearings or the motor block,
are defective.
The
motor
block
defective;
the
thermostat is triggered;
otherwise no mechanical
defect can be detected.
(a)Dirt particles in the inside of
the motor.
(b)Parts of the bearing have
worn after a longer period
of operation.
Remedy
(a)Disassemble and clean the
pump.
-> Disassembling the pump
(b)Disassemble and clean the
pump. Check the parts or
take them to a repair
service.
is
(b)Replace the motor block.
inner
(a)Disassemble and clean the
pump.
(b)Disassemble and clean the
pump. Check the parts or
take them to a repair service,
or send them to Tunze (C).
Werbung
