Grundfos MAGNA3 Bedienungsanleitung Seite 2

HoMe
The home screen is
configured with the most
relevant settings (as shortcut)
and status parameters.
This screen can be customized
under general settings.
STATuS
Operating status
» Operating mode, from
» Control mode
Pump performance
» Max. curve and duty point
» Resulting setpoint
» Liquid temperature
» Speed
» Operating hours
Power and energy consumption
» Power consumption
» Energy consumption
Warning and alarm
Heat energy monitor
Operating log
» Operating hours
» Trend data
Fitted modules
Date and time
Pump identification
Multi-pump system
» Operating status
» System performance
» Power and energy consumption
» Other pump 1, multi-pump sys.
SeTTInGS
Setpoint
1
Operating mode
» Normal
» Stop
» Min.
» Max.
2
Control mode
» AUTO
ADAPT
» FLOW
ADAPT
» Prop. pressure
» Const. pressure
» Const. temp.
» Diff. temp
» Constant curve
Controller settings
FLOW
LIMIT
Automatic Night Setback
3
Analog input
Relay outputs
» Relay output 1
» Relay output 2
4
Setpoint influence
» External setpoint function
» Temperature influence
Bus communication
» Pump number
» Forced local mode
General settings
» Enable/disable settings
» Alarm and warning settings
» Dry running (57)
» Internal sensor fault (88)
» Internal fault (157)
» Delete history
» Define Home display
» Display brightness
» Return to factory settings
» Run start-up guide
ASSIST
Assisted pump setup
» Setting of pump
Setting of date and time
5
Multi-pump setup
*
Setup, analog input
Description, control mode
» AUTO
ADAPT
» FLOW
ADAPT
» Prop. press.
» Const. press.
» Const. temp.
» Differential temp.
» Constant curve
Assisted fault advice
» Blocked pump
» Pump communication fault
» Internal fault
» Internal sensor fault
» Dry running
» Forced pumping
» Undervoltage
» Overvoltage
» High motor temperature
» External sensor fault
» High liquid temperature
» Comm. fault, twin-head pump
*
Wizard
6
Alarms and warnings
» This overview only includes
operation-relevant sub
menus.
1
2
3
4
5
6