Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation of the appliance
3
3.5 Operation with chimney connection
Vapour is extracted through the flue duct, which is fastened to the
•
connection head on the hood.
• The diameter of the flue duct must be the same as the connection
ring. In horizontal settings, the pipe has to have a slight upward slope
(around 10º) so that the air can exit the room easily.
3.6 Operation without chimney connection
Air is filtered through the carbon filter and recirculated in the room.
•
Carbon filter is used when it is impossible to use a flue in the house.
• In flueless use, remove the flaps inside the flue adapter.
• Remove the aluminum grease filter. To install the carbon filter, fit the
filter to the tabs by centring it on the plastic piece on both sides of the
fan body. tighten it by turning right or left.
• Replace aluminum grease filter.
Cleaing and maintenance
4
The device should be cleaned and main-
tained regularly. Failure to keep the de-
vice clean will adversely affect the ser-
vice life of the device. For cleaning and
maintenance, follow the instructions
stated in the manual.
C
Before cleaning and mainte-
nance, unplug the product or
turn off the switch.
Non-compliance with the pro-
visions associated with the
cleaning of the device and
replacement of the filters
may result in a risk of fire.
Therefore, it is recommended
to follow the guidelines stat-
ed here. The manufacturer is
not responsible for the engine
damages or fires originating
from the improper use.
12 / EN
Clean using only a cloth dampened with
a neutral liquid detergent. Do not use
abrasive products or alcohol.
4.1 Cleaning of the grease filter
Grease filter retains the oil particles in the
air. Grease filters may change colour af-
ter repeated cleaning. This is normal and
does not require replacement of filters.
1
1. External grease filter
2. Internal grease filter
• Pull the sliding plate out by holding
Cooker Hood / User Manual
2
Werbung
