Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation of the appliance
3
• You can start your appliance by pres-
sing on the desired speed setting but-
ton. (3, 4)
• You can illuminate the cooking area by
pressing the lamp (1).
3.3 Energy efficient usage
• When using your appliance, adjust the
speed settings according to vapour and
odour intensity, in order to save energy.
• Use low speeds (1-2) under normal
conditions, and high speed (3) and
boost mode for intense odour and va-
pour.
• The hood is equipped with lamps in
order to illuminate the cooking area.
• Using them for environmental lighting
shall cause unnecessary energy expen-
diture and insufficient lighting.
• For your device to consume less
energy, run it at a low speed level.
• Your device will reduce energy con-
sumption as it will run more efficiently
when you provide sufficient air intake
to it.
• Set your device to the intense suction
power level before the formation of
steam, in cases where you know that
the dense steam will occur. So, you
reduce energy consumption by using
your device for a shorter time as it will
have a sufficient air intake.
• Keep the lids of the cookware closed to
reduce the steam evolving.
3.4 Replacement of lamp
C
You may procure lamps from
Authorised Service Agents.
Cooker Hood / User Manual
• Before replacing the light
bulbs, disconnect the power
supply of the hood.
A
• Do not touch the light bulbs
when they are hot.
• Be careful not to touch the
replaced light bulb directly
with hands.
MAX 3 W
Make the electrical connections of the
appliance. Your appliance uses 3W spot
LED lamp. For replacing the lamps, push
downwards on the holder from its be-
hind, turn it counter-clockwise, and take
it out downwards. Apply the above oper-
ation in reverse to install new lamps.
Bulb
Bulb power
Holder/Socket
Bulb voltage
Size
ILCOS code
Luminous flux
Correlated colour
temperature
This product contains a light source of
energy efficiency class "F".
2,5 W
ZIK7
3 V
D56x19,6 mm
GB/T 21656-2016
268 lm
3000 K
11 / EN
Werbung
