Parkside PWBM A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 112

˜ Front cover
The front cover
9 ] [
available from our after-sales service (Fig . E, F):
A1 Torque attachment
A2 Eccentric attachment
A3 Angle attachment
A4 Cutting attachment
˜ Switching on/off
Switching on/off
On
Off
NOTE: You can use the LED work light
in use . Set the rotation direction switch
the LED work light on/off according to above description .
˜ Cleaning and maintenance
Before cleaning or carrying out any maintenance:
–
Set the rotation direction switch
prevents unintentional switching on .
–
Remove the USB cable
–
Remove the bit .
–
Disconnect the charger
110 GB/MT
can be removed for attaching other attachments that are
Action
Press the switch trigger
The LED work light
Release the switch trigger
The LED work light
.
10 ] [
from the socket-outlet .
12 ] [
and hold it in place .
[ 7 ]
lights up .
[ 8 ]
[ 7 ]
goes off .
[ 8 ]
even when the product is not
[ 8 ]
to the middle position . Switch
[ 5 ]
to the middle position . This
[ 5 ]
.