Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.9.1 Cable connection
Grounding description
Twist one end of the cable harness ⑧ in 4.8 to the wiring position shown in the figure, and twist
the other end to the ground copper bar of the PDC using an Allen wrench.
For details, see Section 4.8 Cables ⑧
Connect one end of the ⑧ cable to the
ground hole using
Power Distribution Cabinet
an M4 screw and the other end to the cluster holder hole using an M6 screw.
76
Werbung
