Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.5.2 Installation of Rack
① Take out two side beams and top and bottom beams and assemble them into a rectangular
frame, connect the two top beams with the side beams, and then fix the side beams and top
beams with the round head hexagon combination screws and hexagonal wrench. After fixing,
take two bottom beams and connect the side beams, and fix the side beams and bottom beams
with the round head hexagon socket combination screws and hexagonal wrench.
②The left and right diagonal braces are fixed on both sides of the beam with round head
hexagon combination screws and hexagon wrenches.
③ Fix the two left base plate units to the lower left and upper right corners of the lower rack
using the round head hexagon socket combination screws and hexagonal wrench. Similarly, fix
the two right base plate units to the upper left and lower right corners of the lower rack using the
roundhead hexagon combination screws and the hexagonal wrench.
④ Screw the base into the bottom plate and secure it with hexagonal wrench or by hand.
⑤When installation is complete, stand the rack up.
⑥To fix the rack on the wall, use a hexagonal wrench to install the rack fastener on the socket
combination screw hole above the rack and fix it with the socket combination screw. Fix the
other side of the rack with the wall using round head hexagon combination screws. To fix two
racks together, install the rack fasteners on the hexagon socket combination screw holes above
the frame, and fix them together with hexagon socket combination screws and nuts.
67
Werbung
