Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dimensions (W x D x H)
Warranty period
The total weight (12 battery modules, 1 rack)
Weight of each battery module/battery rack
Case protection grade
Certification
4.4. Preparation
4.4.1 Tools required
TOOL
PHILIP2# crosshead screwdriver
10mm hexagon socket
24mm wrench
4.4.2 Auxiliary Tools and Materials Required
AID/MATERIAL
Auxiliary tools/materials
Fastening materials (M4*12 M6*12 screws,
M6*100 expansion screws, M6 nuts)
13th floor: 530x602x2187 mm
10 years
594 kg
44 kg | 51 kg
IP20
CE/IEC62619/ UN38.3
USE
• Fix the upper and lower tripods to the side beam and the
cross beam.
• Install and connect the side beam/cross beam.
• Fix the L-shaped bracket to the side beam.
• Fix the base assembly to the side beam.
• Fix the diagonal brace to the beams on both sides.
• Fix the base to the side or cross beam.
• Install the ground wire.
•
Install
the
hanging
module/high-voltage control box.
• Fix the battery module and the high-voltage control box
on the rack.
• Fix the expansion screw
• Adjust the height of the base and tighten the nut.
USE
1. Assemble the battery racks and fix them
on the wall or connect the two racks.
2. Assemble the battery modules and
high-voltage control boxes, and fix them to
the racks.
65
lug
on
the
battery
Werbung
