Grundig GFN24840N Bedienungsanleitung Seite 12

1.
To install the wedges, remove the
screws on the product and use the
screws supplied together with the
wedges.
2.
Insert the 2 plastic wedges onto
the rear ventilation cover as
illustrated in the figure.
3.3 Adjusting the feet
If the product stands unbalanced
after installation, adjust the feet
on the front by rotating them to the
right or left.
3.4 Electrical connection
A WARNING:
connections via extension
cables or multi-plugs.
WARNING:
B
power cable must
be replaced by the
Authorized Service Agent.
If two coolers are to be
C
installed side by side,
there should be at least
4 cm distance between
them.
•
•
•
3.5 Illumination lamp
Do not attempt to repair yourself
but call the Authorised Service
Agent if the LED illumination lamps
do not go on or are out of order.
is not suitable for household room
illumination. The intended purpose of
this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer
in a safe and comfortable way.
3.6 Changing the door
opening direction
Do not make
refrigerator can be changed
according to the place you are using
it. If this is necessary, please call your
Damaged
nearest Authorized Service.
Our company shall not be
liable for any damages that will
arise when the product is used
without grounding and electrical
connection in accordance with
the national regulations.
Power cable plug must be within
easy reach after installation.
Do not extension cords or
cordless multiple outlets
between your product and the
wall outlet.
The lamp(s) used in this appliance
Door opening direction of your
EN
A
SV
NO
FIN
DE
13