Werbung
Anti-Theft System (conta)
@ As shown in Fig.3, gently push the lower side of the case and open its cover. Keep the removable face
plate in the case. Then, you can bring the plate safely.
@ Open
(i) Removable Face Plate Case
Fig.3
To install the Removable Face Plate
(1) Slide the left side of the removable face plate in place.
Removable Face Pilate
Fig.4
1, Before removing the removabie face plate, make sure the power is off.
2. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do not remove the removable face plate, while driving your car.
4. Do not place the removable
face plate on the dashboard or nearby areas where the temperature rises
to high leveis.
5. Do not touch the contacts on the removable face plate or on the main unit, since this may result in
poor electrical contacts.
6. ff dirt or other foreign substances get on the contacts, wipe them with
a clean, dry. cloth.
Electrical Connection
r
244
Bead
© To prevent damage to the unit be sure to follow the connection diagram below.
|
| © Be sure to insutate any-exposed wires from a possible short-circuit from the car chassis. Bundie all cables
H
and keep cable terminals free from touching any metal parts.
Brown w/White Stripe
Not connected |
to CY-M7
"M70EN
"|
cat orto the "IGN" or "ACC" terminal of
\ the fuse block.
nN
Connect to the "radio" power line of the |
',
Connect
to a well grounded
metalic
bee eee
telephone
mute lead, if connected
to the car telephone
mute line. will
actvate
the muting
cwcuit and
the
bt) &
{-) @)
&)
4)
)
$6
662 =
Connection
onty to the radio mute line.
Ge sure to ascertain this because it will
not
work
with other
type of output
peep
a ag i
Ea
ae
patna
N319/N3'10Z0Y-0
N31S20H-09
Werbung
