Werbung
CD Changer Controls Operation (conta)
(Only for CQ-RD75LEN)
a
—
15
Changer Select
Using the adaptor (CA-CDS5EN,
optional item to be put on the market shortly) Which is capable of
connecting two changers, will make possible to control these two changers.
@ When the PTY button is pressed for more than 2 seconds in the CD mode, a seiect is made from the
currently played (CDI or CD2) changer to the other changer.
Qt either one is not connected or if the magazine is not loaded, a select is made to the other CD
changer.
<DISPLAY>
This mark is displayed when displaying the title of the disc whose litle has not been input
previously.Excepting the CD LIST display mode.
RHKKREKE
This mark is displayed before aisplaying the title of the disc that has not been playec at ail
as yet in spite of setting made in the magazine.
ee we we oe ce we ww oe
6
When 30 titles have already been stored in the memory:The memory is full. You must remove
the old title to make room for the new one by following the procedure below.
'T Press the TITLE button for more than 2 seconds. The display changes as shown below.
"TITLE" (for 1 second)
4
"FULL (blinks for 3 seconds)
"ist title"
2 Press TITLE for less than 2 seconds each time to find a title you want to replace
'3 When you find the titie, press TITLE for more than 2 seconds for cancellation.
@ Change the title by repeating the CD Tite input procedure = through 4 on page {2.
Anti-Theft System
This unit is equipped with a removable control unit. By removing this unit when the vehicle is unattended
the radio becomes totally inoperabie.
To Remove the Removable Face Plate
«J: Switch off the power.
(2°Press the DETACH button. The removable face plate will be released.
Fig.1
(3) Remove the removable face plate by pulling on the right side of the unit. Piace the removable face plate
in a supplied case.
Contacts
Fig.2
Switching Security Indicator:
When the removable face plate is removed from the unit, the security indicator will be illuminated. With the
car tumed on, press the SEL button for 2 seconds repeatedly to change the display (appearing for 2 seconds)
as follows, thus switching the security indicator to on/off.
Display
Security Indicator
ALR
fe
treet
|
ALR
OFF
Iluminates
Disappears
N319/N31020u-0
N31SZ0H-09
Werbung
