Limit Switch Setting In Manual Mode; Procedure For Limit Switch Setting In Manual Mode; Example 1: Setting As First The Upper Limit Switch; Example 2: Setting As First The Lower Limit Switch - cherubini Plug&Play Plus Einstellanleitungen

LIMIT SWITCH SETTING IN MANUAL MODE

Learning the limit switches in manual mode is required for rolling shutters that
do not have either internal or external safety lugs (A).
Either flexible (B) or rigid (C) ribs may be used for the connection to the tube.
A

PROCEDURE FOR LIMIT SWITCH SETTING IN MANUAL MODE

Depending on your individual needs, it's possible to learn first either the upper or the
lower limit switch.
EXAMPLE 1
SETTING AS FIRST THE UPPER LIMIT SWITCH
If the rolling shutter is completely open, you have first to drive it down by around
20 cm.
Using the button switch, put the rolling shutter to the upper desired position and to
memorise, perform the indicated sequence of commands; (UP-UP-UP).
?
UP
DOWN
Using the button switch, put the rolling shutter to the lower desired position and to
memorise, perform the indicated sequence of commands; (DOWN-DOWN-DOWN).
B
UP
DOWN
17
C
UP UP
HOLD
DOWN DOWN
HOLD
2 sec
2 sec