Pioneer A-5 Bedienungsanleitung Seite 9

FRONT PANEL FACILITIES
TAPE COPY INDICATOR
This indicates the tape deck which is recording in accor-
dance with the position selected by the REC OUT SELEC-
TOR switch.
@) SPEAKERS SWITCHES
These are used to select the speakers through which you will
listen to the sound. When one of the switches is depressed,
the corresponding speaker indicator will light to indicate that
the selected speakers are now working.
A: The sound is heard from the speakers connected to
the speaker A terminals.
B: |The sound is heard from the speakers connected to
the speaker B terminals.
No sound will be heard when SPEAKERS A and B switches
are both released. This is the position at which the sound can
be heard through the headphones.
(2 TONE SWITCH
When this switch is depressed to the ON position (TONE
CONTROL indicator lights), the input signal's tone quality
can be adjusted with the tone controls.
(3) MUTING —20 dB SWITCH
The volume is attenuated by —20 dB when this switch is
depressed to the ON position (MUTING indicator lights). The
switch can be used effectively when the stylus descends on-
to the record during record play, when the sound is to be
turned down temporarily and when you want to adjust the
sound precisely as you listen to a program source under low
sound level conditions.
(@ MUTING INDICATOR
This lights up red in accordance with the ON. poston of the
MUTING switch.
(5) SPEAKERS A/B INDICATORS
These light when one of the SPEAKERS switches has been
depressed.
(6) LOUDNESS INDICATOR
This lights when the LOUDNESS switch has been set to ON.
(2) TONE CONTROL INDICATOR
This lights when the tone control circuitry has been ac-
tuated.
FUNCTION INDICATORS
The indicator corresponding to the selected function switch
lights. |