Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONNECTING THE COMPONENTS
CONNECTING THE TURNTABLE (Fig. 3)
®
Connect the pin plug cords of the turntable to the PHONO
jacks on the amplifier.
e
Connect the ground lead of the turntable to the GND ter-
minal on the amplifier.
NOTE:
Depending on the method used by your turntable's cartridge to
generate electrical signals, the output terminals on the turntable
may be connected to terminals other than the PHONO jacks. Read
through the instructions accompanying the cartridge and connect
properly.
GND
Ground lead
terminal
Turntable
CONNECTING
THE TUNER
(Fig. 4)
Connect the unit's TUNER jacks to the output jacks on the
tuner using the pin plug cords.
Connect the left and right
channels properly.
Fig. 4
CONNECTING
THE AUX JACK (Fig. 5)
These jacks are used to hook up a TV tuner, cartridge tape
player or tape deck. Connect the unit's AUX jacks to the out-
put or PLAY jacks on the component using the pin plug cords.
Output jacks
TV tuner
Stereo amplifier
CONNECTING THE TAPE DECK (Fig. 6)
There are two sets of input and output jacks for the tape deck,
TAPE 1 and TAPE 2. Two decks can be connected for tape co-
pying (dubbing) or for simultaneous recording.
Use the TAPE 1 jacks when connecting only one deck.
Connections for recording
Connect the unit's TAPE jacks labeled REC to the LINE INPUT
(REC) jacks on the tape deck using the pin plug cords.
Connections for playback
Connect the unit's TAPE jacks labeled PLAY to the LINE OUT-
PUT (PLAY) jacks on the tape deck using the pin plug cords.
Stereo amplifier
po
deck
L |
i
=
=
||
TAPE 1 jacks
AUX input jacks
Fig. 5
ae y x
INPUT
- OUTPUT
>
(REC!
(PLAY!
a
att
ue
whee
ry
Fig. 6
TAPE 2 JACK CONNECTIONS
(Fig. 7)
A second tape deck or other adaptor component such as a
Stereo amplifier
a
ae
=
ral
HO.
TAPE 2 jacks
-
TAPE Semen
Vow
FEC.
mar
| +
2@©t © = rs
cs
AZ © R©
eae
i
Fig. 7
Werbung
