Pioneer A-5 Bedienungsanleitung Seite 11

USING THE TAPE DECKS
PLAYING BACK TAPES (Fig. 8)
1. When playing back a tape on the tape deck which has been
connected to the TAPE 1 jacks, depress the TAPE 1 func-
tion switch. When playing back a tape on the tape deck
which has been connected to the TAPE 2 jacks, depress
the TAPE 2 function switch.
. Set the tape deck to the playback mode.
Adjust the volume with the VOLUME control.
. Depress the TONE switch to the ON position and then ad-
just the tone controls (TONE CONTROL indicator lights) to
achieve the sound of your preference.
RECORDING TAPES (Fig. 9)
1. Select the program source to be recorded using the func-
tion switch and check the operation of the component.
2. Start recording in line with the procedure for recording ona
tape deck.
For instance, to record a program source (such as an FM
broadcast) while you are listening to another program
source (such as a record).
Set the REC OUT SELECTOR to the TUNER position and
function switch to PHONO. Refer to page 12 for details.
NOTES: =
e The volume, tone controls (BASS and TREBLE), balance control
and loudness control have no effect at all on the signals from the
TAPE REC jacks of the stereo amplifier.
e Refer to the section "REC OUT SELECTOR switch and function
switches'' on page 12 for details on how to use the REC OUT
SELECTOR switch.
PWHN
Tape monitoring
When monitoring the recording through the stereo head-
phones or speakers on a deck which has a monitoring
mechanism (3-head type), depress the TAPE 1 or TAPE 2
function switch in line with the tape deck used for recording.
NOTE:
It is not possible to monitor the recording sound with a 2-head tape
deck even by operating the function switches. However, the sound
which is about to be recorded can be heard.
COPYING (DUBBING) TAPES (Fig. 10)
If you have two tape decks, you can copy (or dub) a pre-
recorded tape's contents onto another tape.
1. Connect the two tape decks to the TAPE 17 and TAPE 2
jacks. (Refer to ''Connecting the tape deck' on page 6.)
2. Set the REC OUT SELECTOR switch to COPY 1 »® 2 when
copying from the tape deck connected to the TAPE 1 jacks
to the tape deck connected to the TAPE 2 jacks.
3. In accordance with the actual direction of the tape copying,
set the tape deck connected to the TAPE 1 jacks to the
playback mode and the tape deck connected to the TAPE 2
jacks to the recording mode.
The tape copying can be monitored by depressing the
TAPE 1 or TAPE 2 function switch.
Tape deck 1 Tape deck 2 —
Fito:
. a! -
TAPE 1 PLAY jacks TAPE 2
1 PLAY jacks
Stereo amplifier
Depress TAPE 1 or TAPE 2 function
switch in line with the tape deck used for
playback. Fig. 8
(PHONO)
Turntable
(AUX)
(TUNER)
TV tuner
Tuner
PHONO
AUX
Set to the position corresponding
to the program source which is
being recorded.
Tape deck
Tape deck 1
(Playback)
Set to the COPY 1 B® 2
position when copying
from tape deck 1 onto
tape deck 2.
AEC OUT SELECTOR
PHONG
AUX
T
COPY 12
Stereo amplifier
TAPE 2
REC
persia Ral |
Sel ae font ooo | (Recording)
Tape deck 2
Fig. 10
a]
Fig. 9