Herunterladen Diese Seite drucken

Pioneer A-5 Bedienungsanleitung Seite 12

Stereo-verstarker

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EFFECTIVE USES
REC OUT SELECTOR SWITCH AND
FUNCTION SWITCHES
With this model you can send out the signals of a different
program source from that selected by the function switch, to
the TAPE REC terminals. For instance, if you set the REC OUT
SELECTOR switch to TUNER and the function switch to
PHONO, you can record a radio program on your tape deck
and, at the same time, enjoy listening to records. The relation-
ship of the TAPE
1 REC and TAPE 2 REC terminal output
signals, as determined by the REC OUT SELECTOR switch, is
as follows:
REC OUT SELECTOR
positions and TAPE
REC terminal output
REC OUT
TAPE REC terminal output
SELECTOR
eed
TAPE
| _TAPERECT 1
TAPE
|
TAPEREC2 2
TUNER
ene
AIF
REC
QUT
SELECTOR
TUNER
COPY 1» 2
PHONO
AUX
Amplifier Section
Continuous Power Output is 35 watts* per channel,
min., at 8 ohms from 20 Hertz to 20,000 Hertz with no
more than 0.009% total harmonic distortion.
Continuous Power Output at 1 kHz (both channels driven)
T.H.D. 0.05% 8 ohms 40 watts per channel
Total Harmonic Distortion (20 Hertz to 20,000 Hertz, 8 ohms,
from AUX)
continuous rated power output ....... No more than 0.009%
17.5 watts per channel power
OULU: sc. s thee beecatakteceuissavscecenedeas's No more than 0.007%
Intermodulation Distortion (50 Hertz:7,000 Hertz
= 4:1,
8 ohms, from AUX)
continuous rated power output ....... No more than 0.007%
17.5 watts per channel power output
No more than 0.005%
Damping Factor (20 Hertz to 20,000 Hertz, 8 ohms) .......... 50
Input Sensitivity/Impedance
PHONG sadedeesctoreveuacsseas Sastigavevedeces 2.5 mV/50 kilohms
TUNER, AUX, TAPE PLAY 1, 2 .......... 150 mV/50 kilohms
Phono Overload Level (T.H.D. 0.004%, 1,000 Hz)
PHONO
sc :cc5 sacs aoccewcavetrandasscnecaed evechaneeadavedaa' 140 mV
Output (Level/Impedance)
TAPE REC 43 2" aeons
teh aeeeredos 150 mV/2.7 kilohms
SDOAKON sckeseGedecettdchedancceeeunks A/OFF, B/OFF(6~16 QQ)
Frequency Response
PHONO (RIAA Equalization)
Sada Aaa sap eahanea se abariraaansaawannasa 20 Hz to 20,000 Hz+0.5 dB
TUNER, AUX, TAPE PLAY 1, 2..... 5 Hz to 100,000 Hz*$ dB
12
Tone Control
BAGO
elie ces senha manawa se wapeutenaearehcecataceedweek +8 dB (100 Hz)
DRE BLE :ecieccs tec teset canteens dacddcvauentaccwrncden +8 dB (10 kHz)
Loudness Contour (Volume control set at —40 dB)
ee
een ee ere ne anne +6 dB (100 Hz), +3 dB (10 kHz)
Hum and Noise (IHF, short-circuited
A network)
PHONO:
pariG ih otcauietceaueneienl
en cuaeiacuutac aecedtnnees 70 dB
TUNER,
AUX, TAPE PLAY 1, 2 .......cccccceceseaceeenes 100 dB
Hum and Noise (DIN, continuous Power/50 mW)
PHONG si csducstocounayeudaioesaceeeaiatecsosees oe: 72 dB/64 dB
TUNER, AUX, TAPE 1, 2 ........ccccsccescceerceees 95 dB/69 dB
MCI
hoe aiectoned Vewticeate be uisens acters tsacouk ah teanecanesaasaues —20 dB
Miscellaneous
Power Requirements .........scsssesees a.c. 220 volts, 50/60 Hz
Power COnSuUMptiOn
........ccccssccecsecceeeeccueeenneeuns 250 watts
DiMeNnsiONS .........ccecevescerenees 420 (W) x 98 (H) x 367 (D) mm
16-9/16 (W) x 3-7/8 (H) x 14-11/16 (D) in —
Weight (without package) ...........cseeseeeees 6.5 kg (14 Ib 5 oz)
Furnished Parts
Operating INStruCTIONS .........ccccc
cece scneeeceeeeveceeecueuensuuees 1
"Measured pursuant
to the Federal
Trade
Commission's
Trade
Regulation rule on Power Output Claims for Amplifier.
NOTE:
Specifications and design subject to possible modification without
notice.

Werbung

loading