Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FRONT PANEL FACILITIES
LOUDNESS
indicator
(PIONEER
STEREO
AMPLIFIER
A-5S
TONE switch
(1) POWER SWITCH
Power is supplied to the stereo amplifier as soon as this
switch is depressed to the ON position.
The power is turned off when the switch is released to the
OFF position.
2) BASS CONTROL
This is used to adjust the bass (low-frequency range) sound.
Rotate this control with the TONE switch depressed to the
ON position. The bass is emphasized when the control is
rotated clockwise from its center position and attenuated
when it is rotated counterclockwise.
3) TREBLE CONTROL
This is used to adjust the treble (high-frequency range)
sound. Rotate this control with the TONE switch depressed
to the ON position. The treble is emphasized when the con-
trol is rotated clockwise from its center position and at-
tenuated when it is rotated counterclockwise.
(4) REC OUT SELECTOR SWITCH
This is used to select the output signal which is fed out to the
TAPE REC 1, 2 jacks.
COPY 1 P 2: The output signal is fed out from the TAPE 1
PLAY jacks to the TAPE 2 REC jacks (when
dubbing a tape from TAPE 1 to TAPE 2).
TUNER:
The output signal from the TUNER jacks is
fed out to the TAPE 1 REC and TAPE 2 REC
jacks.
PHONO:
The output signal from the PHONO jacks is
fed out to the TAPE 1 REC and TAPE 2 REC
jacks.
AUX:
The output signal from the AUX jacks is fed
out to the TAPE
1 REC and TAPE 2 REC
jacks.
(5) PHONES JACK
Connect the plug on your headphones to this jack when
listening to a program in private.
To listen to a program through the headphones, release
both the SPEAKERS A and B switches to the OFF posi-
tions.
(6) FUNCTION SWITCHES
These are used to select the sound source. At the left of each
switch there is a function
indicator
(pictographic) which
lights when the corresponding switch has been depressed.
This indicates that the lighted function has been selected.
PHONO:
Depress for playing records on a turntable con-
nected to the PHONO jacks.
TUNER:
Depress for listening to a program on a tuner
connected to the TUNER jacks.
AUX:
Depress for listening to the sound from a stereo
component connected to the AUX jacks.
TAPE 1:
Depress for listening to a tape in a tape deck
connected to the TAPE 1 jacks or to monitor a
recording.
TAPE 2:
Depress for listening to a tape in a second tape
deck (or other adaptor component) connected
to the TAPE 2 jacks or to monitor a recording.
NOTE:
Depress only one function switch at a time. The desired program
source may not be selected if two or more switches are depressed
at the same
time.
@ BALANCE CONTROL
This is used to adjust the balance of the sound from the left
and right channels. When rotated clockwise from its center
position, the volume of the Jeft (L) channel is reduced; when
rotated counterclockwise, the volume of the right (R) chan-
nel is reduced.
VOLUME CONTROL
This is used to adjust the volume of sound heard through the
speakers or headphones. No sound is heard when tt is set to
_ the "0" position. To increase the volume, rotate this control
slowly clockwise (QQ).
(9) LOUDNESS SWITCH
The bass and treble sound is emphasized when this switch ts
depressed to the ON position (LOUDNESS indicator lights)
under low volume listening conditions.
The sound comes
alive even when the volume is low.
Werbung
