Werbung
12
Mounting
Warning! The unit will warm up to high temperature during normal operation. Ensure sufficient cooling air flow in all conditions:
- Always install ACS55 so that cooling fans are vertical.
- Leave sufficient space around frame A and B units. Frame C and D units are fan cooled, so they can be installed side by side without
extra space between them.
Install the unit using the mounting clip on a 35 mm DIN rail or on a wall.
Mounting on DIN rail
"Click" ACS55 to the rail. Press the
lever on top of the mounting clip to
detach.
All manuals and user guides at all-guides.com
Mounting on wall
Install the unit onto the wall through
the mounting clip. Use M4 screws.
Clearance distances
Always leave sufficient space around the unit to ensure
proper cooling.
5 cm
(2 in.)
X
5 cm
(2 in.)
Frames
A and B
cm (in.)
X 1.5 (0.6)
EN
5 cm
(2 in.)
X
X
5 cm
Frames
(2 in.)
C and D
cm (in.)
0 (0)
Werbung
