AEG BSE778380B Benutzerinformation Seite 251

Step 3
Press:
Step 4 Set the temperature.
Step 5
Press:
Step 6 Press the cover of the water drawer to open it.
Step 7 Fill the water drawer with cold water to the maximum level (around 900 ml) until the signal sounds
or the display shows the message. Do not fill the water drawer over its maximum capacity. There is
a risk of water leakage, overflow and furniture damage.
WARNING!
Use only cold tap water. Do not use filtered (demineralised) or distilled water.
Do not use other liquids. Do not pour flammable or alcoholic liquids into the
water drawer.
Step 8 Push the water drawer to its initial position.
Step 9
Press:
When the oven reaches the set temperature, the signal sounds.
Step 10 When the water drawer runs out of water, the signal sounds. Refill the water drawer.
Step 11 Turn off the oven.
Step 12 Empty the water drawer after cooking ends.
WARNING!
The oven is hot. There is a risk of burns. Be careful when you empty the wa‐
ter drawer.
Step 13 Residual water can condensate in the cavity. After cooking, carefully open the oven door. When the
oven is cold, dry the cavity with a soft cloth. Wait for at least 60 minutes after each use to prevent
hot water from exiting the water outlet valve.
7.3 Water tank
Water tank indicator
The tank is full.
The tank is half full.
. The display shows the temperature settings.
.
.
Water tank indicator
The tank is empty. Refill the tank.
If you put too much water into the tank, the safety out‐
let moves the excess water to the bottom of the cavi‐
ty. Remove the water with a sponge.
ENGLISH 251