Herunterladen Diese Seite drucken

Grundig FINE ARTS CD 9009 Serviceanleitung Seite 6

Werbung

@
Canada
Safety Instructions
A
The lightning flash with arrowhead symbol within an equilate-
ral triangle is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclo-
sure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation pointwithin an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accom-
panying the appliance.
This product was designed and manufactured to meet
strict quality and safety standards. There are, however,
some installation and operation precautions which you
should be particularly aware of.
Read Instructions
- All the safety and operating instructions
should be read before the appliance. is operated.
Retain instructions - The safety and operating instructions
should be retained for future reference.
Heat- All warnings on the appliance and in the operating in-
structions should be adhered to.
Follow Instructions - All operating and handling instructions
should be followed.
Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink,
laundry tub, ina wet basement, or near a swimming pool, and
the like.
Wall or Ceiling Mounting - The appliance should be mounted
to wall or ceiling only as recommended by the manufacturer.
Ventilation - The appliance should be situated so that its loca-
tion or position does not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed,
sofa, rug, or similar surface that may block the ventilation
openings; or, placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of air through
the ventilation openings.
Heat - The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
Code zur Farbkennzeichnung
DIN
CD
BK
BN
RD
OG
YE
GN
BU
IEC 757
Schwarz / Black / Nero / Noir / Negro
Braun / Brown / Bruno / Brun / Marron
Rot / Red / Rosso / Rouge / Rojo
Orange / Orange / Arancione / Orange / Naranjo
Gelb / Yellow / Giallo / Jaune / Amarillo
Grin / Green / Verde / Vert / Verde
Blau / Blue / Blu / Bleu / Azul
Power Sources - The appliance should be connected
to a
power supply only of the type given above or as marked on
the appliance.
Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
Cleaning - The appliance should be cleaned only as recom-
mended by the manufacturer.
Power Lines - An outdoor antenna should be located
away from power lines.
Outdoor Antenna
Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges. Section 810 of the National
Electrical Code, ANSI / NFPA No. 70-1984, provides informa-
tion with respect to proper grounding of the mast and suppor-
ting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location
of
antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode:
Nonuse Periods - The power cord of the appliance should be
unplugged from the outlet when left unused fora long period
of time.
Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
Damage Requiring Service - The appliance should be servi-
ced by qualified service personnel when: The power-supply
cord or the plug has been damaged; or objects have fallen,
or liquid has been spilled into the appliance; or the appliance
has been exposed to rain; or the appliance does not appear
to operate normally or exhibits a marked change in perfor-
mance; or the appliance has been dropped, or the enclosure
damaged;
or the batteries have been damaged.
Servicing - the user should not attempt to service the applian-
ce beyond that described in the operating instructions. All
other servicing should be referred to qualified service person-
nel.
Points x1 and x2 apply only to receivers or tuners.
Code for designation of colours
DIN IEC 757
Violett / Violet / Vioietto / Vioiet / Vioieto
Grau / Grey / Grigio / Gris
WeiB / White / Bianco / Blanc / Blanco
Rosa / Pink / Rosa / Rose / Rosa
Gold / Gold / Dorato / Doré / Oro
Tirkis / Turquoise / Turchese / Turquoise / Turquis
Silber / Silver / Argenteo / Argentin / Plata

Werbung

loading