Werbung
D
Abgleichanweisung
Serviceschleife
Die Serviceschleife ist zur Funktionsiberpriifung und zur Fehlersuche
gedacht.
Starten der Serviceschleife:
Schalten Sie das Gerat aus.
Servicestellung "0"
Servicestellung "1"
Servicestellung "2"
Servicestellung "3"
Servicestellung "4"
Servicestellung "8"
Schalten Sie das Gerat aus.
Servicestellung "9"
Schalten Sie das Gerat aus.
15
Alignment instruction
Service loop
The service loop is incorporated for fault finding.
Starting the Service loop
Switch the unit off. The service loop is started by depressing the
buttons OPEN/CLOSE and PAUSE and simultaneously switching the
unit on. In the display is shown SERVICE?.
Service position "0"
Pressing the button "0" brings the control electronics into the service
setting "0" and the indication LOOP:0 is shown in the display.
In the service position "0" , by depressing the button << or >> the free
movement of the pick up arm can be checked.
Service position "1"
By depressing the "TRACK >" button the service position "1" is set, the
indication is shown in the display. The focus routine is started until the
button "TRACK >" is depressed again.
Service position "2"
Service position "3"
Service position "4"
Service position "8"
Switch off the set.
Service position "9"
Switch off the set.
Werbung
