Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6 Troubleshooting
In the case of technical problems, you can contact our hotline service, Tel. 0900 00 1675 within Swit-
zerland (cost via Swisscom at time of going to print: CHF 2.60/min). In the case of claims under the
terms of guarantee, contact your sales outlet. There is a 2 year period of guarantee.
Faults
Units cannot be
turned on.
The green Link"
light on the Parent
Unit is flashing
and you cannot
hear the sounds
from your baby's
room.
Can't hear your
baby on the
Parent Unit, but
the Link" light is
still glowing
steadily.
Your Baby Monitor
is emitting an high
pitched
ear−piercing noise.
All manuals and user guides at all-guides.com
Causes
− Check that you have turned the power on from the mains and that the
connections are firm.
− 1. You may have moved out of range −move closer to the Baby Unit and
wait 5 seconds for the Link" to establish.
− 2. You may need to re−establish the Link" between the two units. Turn both
units off and then:
On the Baby Unit:
−Press and release the On/Off key.
On the Parent Unit:
−Press and release the On/Off key. The green Link" light comes on (this
may take a few seconds).
− 1. Check the volume is turned up on the Parent Unit.
− 2. You may need to turn up the sensitivity of your Baby Monitor.
− This may happen if your Parent and Baby Units are too close together.
Move them further apart.
− Troubleshooting −
63
Werbung
