Werbung
Verfügbare Sprachen
Verfügbare Sprachen
− Operation −
10. If you will change the volume level of the alarm tone, select with the Up/Down Keys the subitem
[Volume] and press the OK Key. The display shows [Level] and a row of blocks representing the
volume of the Baby Alert tone. Use the Up/Down Keys to select the required volume level
(full = loudest). Press the OK Key. Display briefly shows [Saved]. The alarm will now sound at
the Parent Unit each time a feed is due. Press any button on the Parent Unit to silence the alarm.
To turn the feed alarm off
If you no longer want the alarm to sound when a feed is due, you will need to turn the feed alarm off.
Follow steps 8−9 above.
11. Display shows [Off?]. Press the OK Key. The Display briefly shows [Saved]. The alarm is now
turned off and will not sound when the next feed is due.
Customise your Baby Monitor to your Baby
Some babys are louder than others! You can customise the sound sensitivity of your Baby Monitor to
suit your baby. Set the sensitivity High" for a quiet sleeper with a soft cry and set to Low" sensitivity if
they tend to make noise whilst sleeping or can make quite loud noises before they are truly crying.
At the Parent Unit
1. Press the Menu Key, then use the Up/Down Keys to scroll to [Sensitivity]. Press the OK Key.
2. The Display shows [Level] and a row of blocks indicating the volume level
(full = high sensitivity). Use the Up/Down Keys to select the sensitivity level. Press the OK Key.
The Display briefly shows [Saved].
Eco Mode
The Baby Unit is equipped with a special transmission technology.
The low radiation feature works by lowering the radiated radio transmission power from the Baby Unit,
and at the same time increasing the sensitivity of the receiver to maintain the normal range.
62
All manuals and user guides at all-guides.com
Werbung
