switel BCC 51 Bedienungsanleitung Seite 58

− Operation −
7. Display shows [Minute]. Use the Up/Down Keys to scroll to the correct minute. Press the
OK Key. The display briefly shows [Saved] and gives a confirming beep". The date and time will
now be displayed on the Parent Unit.
To select the 12 or 24 hour clock format
At the Parent Unit
1. Press the Menu Key then use the Up/Down Keys to scroll to [Clock]. Press the OK Key.
2. The Display shows [Set time]. Press the Up/Down Keys to scroll to [Hour Format]. Press the
OK Key.
3. The Display shows [12 Hrs?] (asking if you would like to change to the 12 hour clock format).
Press the OK Key or if you do not want to change, press the Menu Key to exit without changing.
The Display briefly shows [Saved] to confirm that the 12 hour clock has been set.
Time displayed in the 12 hour clock format will include a small a" to denote AM and a small
p" for PM.
4. To change back to the 24 hour clock format ,repeat the steps above, at step 3 the Display will
show [24 Hrs?]. Press the OK Key to confirm.
Baby alert!
You can set your Parent Unit to give an extra warning beep" should the noise levels in your baby's
room activate the red lights on the sound sensor. This is particularly useful if the volume of your
Parent Unit is turned down and you are just using the sensor lights to monitor the noise levels in your
baby's room.
On the Parent Unit
1. Press the Menu Key then use the Up/Down Keys to scroll to [Sound Alert]. Press the OK Key.
2. The Display shows [On?]. Press the OK Key to turn the alert on or Menu Key to exit without
change. The Display will briefly show [Saved] and a confirmation tone sounds.
3. If you want to change the volume level of the alarm tone, press the Menu Key and navigate to
the [Sound Alert] Menu, press the OK Key and navigate to the [Volume] Menu and press the
OK Key and adjust the volume. The display shows [Level] and a row of blocks representing the
volume of the Baby Alert tone. Use the Up/Down Keys to select the required volume level
(full =l oudest).
4. The display will briefly show [Saved]. An alert tone will now sound at the Parent Unit should your
babys noise levels reach the red.
5. To turn the Baby Alert alarm off, just follow the steps above. The display will show [Off?]. Press
the OK Key. The Display will briefly show [Saved].
Lullaby
Your baby can be soothed to sleep by a gentle lullaby from the Baby Unit. There are 5 tunes from
which to choose, or you can opt to play through all of them in turn by selecting [Play All]. The lullaby
feature can be turned on and off from both the Baby Unit and the Parent Unit and is indicated on both
by a musical note icon. The icon and the lullaby title show on both Displays whilst the lullaby is
playing. The lullabies will play for 15 minutes.
To select and start a lullaby
At the Baby Unit
1. Press the Music Key. The Display will illuminate. The lullaby is shown.
2. Continue to press the Music Key to scroll to the tune of your choice, or to select
[Play all?].
3. Press the Play/Stop Key again to start or stop the lullaby.
58
All manuals and user guides at all-guides.com