Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
OPTIONALS
Parts listed below can be standard equipment in your ar-
ea: contact your dealer.
In
stall in accordance with the assembly/installation in-
structions of the respective option.
For spare parts see IPL.
6.1 General instructions for ordering
parts
Your order for parts should contain the following
information:
-
machine type and product series number (PSN) or the
product identification no. (PIN),
-
description, part number (see IPL) and quantity in
question.
If in doubt send a rough sketch of the part clearly marked
with your name and address.
Attention:
Take into account Errata and other supplements!
Contact your dealer!
6.2 Spacer set
part no. 'ST0053'
For use of these 8 mm thick rings refer to sect. 3.6.
6.3 Depth limiting chain
part no. 'XF00139'
If you want (or must) to be sure the mower keeps the same
height we recommend fitting this chain.
It also prevent the mower from being damaged during
being folded upward into transport position.
6.4 Gradual cutting height adjustment
set
part no. 'ME0015K0'
This set provides gradual cutting height adjustment through
rotating skid saucers. This set is basically meant for the outer
drums but it can be additionally fitted to the inner drums as
well.
For fitting see installation instruction drawing MO144
which is a part of the set.
Use (see drawing MO144):
Place the blade detachment tool into the brace between
skid saucer and drum skirt, hold it tight and then rotate the
skid saucer as required. You will feel a resistance and when
you continue rotation the cutting height is increased by one
step of 10 mm (one click). A total adjustment of 30 mm can
be obtained.
6.5 Repairkit for protection curtain
part no. 'DM00295'
This kit consists of a tube of glue and a piece of protection
curtain material. Using thes e items the protection curtain
can be repaired.
G0202MKD3
EN24
Werbung
