Volume - Imperial DABMAN d10 Bedienungsanleitung

8. OPERATION
Playback will start with the last station that was selected.
When switching to FM mode for the first time, you may hear a noise
and the received frequency (87.5 MHz) will appear on the display.
To receive the radio stations, first perform a scan.
Please also refer to section 7.4.

8.3. Volume

E
By pressing the VOL- / VOL+ buttons on the unit or on the remote
control you can adjust the playback volume (+ will increase the volu-
me, - will decrease the volume).
By pressing the MUTE button you can switch the radio loudspeaker
on and off.
When the mute function is active, „Volume Muted" will appear on the
display.
Operating Manual 70