Information; Scanning For Stations; Volume Control And Mute Setting - Imperial DABMAN 100 Bedienungsanleitung

7. DAB

7.1.2 Information

E D
While in DAB mode, you can call up background information on the programme
being received (e.g. title name, artist), as well as additional information (e.g. signal
strength, broadcast quality etc.) which will then be shown on the display.
To do this, press the Info key while in this operating mode (see Fig. 4.1), if neces-
sary repeatedly, to show the desired information on the display. The information
will be shown as scrolling text in the bottom line of the display (below the station
name).

7.1.3 Scanning for stations

While in DAB mode press the Scan key (see Fig. 4.1), the DABMAN 100 will
perform a new station scan. This may become necessary if you change the loca-
tion of the radio, or if new DAB stations become available. The scan will begin, and
a progress bar will appear on the display. As soon as the scan is completed, the
radio will play the station most recently selected. The Favourites memory will not
be affected by the station scan.

7.1.4 Volume control and Mute setting

Use the +/- keys (see Fig. 4.1) to adjust the volume being played (use + to
increase the volume, or – to decrease the volume, If you adjust the volume, a
volume indicator bar will be shown on the display.
Use the Mute key (see Fig. 4.1) to switch off the loudspeaker of the radio, press
the key again to switch it back on. The display will show the message "Volume
mute".
43