Hilti DCG 180-P Bedienungsanleitung Seite 24

Power tool
Dimensions (L x H x W) without hood
Weight in accordance with EPTA procedure 01/2003
Information about the power tool and its applications
Drive spindle thread (arbor size)
en
Spindle length
Protection class as per EN / IEC
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise information (as perEN 60745‑1):
Typical A-weighted sound power level, DCG 180-D
Typical A-weighted emission sound pressure level,
DCG 180-D
Typical A-weighted sound power level, DCG 180-P
Typical A-weighted emission sound pressure level,
DCG 180-P
Uncertainty for the given sound level
Vibration information in accordance with EN 60745‑3-2
Triaxial vibration values (vibration vector sum)
Surface grinding with the vibration absorbing side
handle, a
h,AG
Uncertainty (K)
Triaxial vibration values (vibration vector sum)
Surface grinding with the vibration absorbing side
handle, a
h,AG
Uncertainty (K)
Additional information
5 Safety instructions
5.1 General Power Tool Safety Warnings
a)
WARNING
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
20
All manuals and user guides at all-guides.com
DCG 180‑D/ DCG 180‑P
510 mm x 138 mm x 111 mm
5.8 kg
M 14
25 mm
Protection class II (double insulated)
101 dB (A)
90 dB (A)
101 dB (A)
90 dB (A)
3 dB (A)
DCG 180‑D
5.0 m/s²
1.5 m/s²
DCG 180‑P
5.0 m/s²
1.5 m/s²
Other applications such as cutting or wire brushing
may produce vibration values different to those given.
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or dark
b) Do not operate power tools in explosive atmo-
areas invite accidents.
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.