Hilti DCG 180-P Bedienungsanleitung Seite 32

8.2 Maintenance
WARNING
Do not operate the power tool if parts are damaged,
if the electronic control unit is defective or when the
controls do not function faultlessly. Have the power
tool repaired by Hilti Service.
WARNING
en
Repairs to the electrical section of the power tool may
be carried out only by trained electrical specialists.
9 Troubleshooting
Fault
The power tool doesn't start.
The power tool doesn't achieve
full power.
10 Disposal
Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials
must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or
Hilti representative for further information.
For EC countries only
Disposal of electric tools together with household waste is not permissible.
In observance of the European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electrical appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
28
All manuals and user guides at all-guides.com
Check all external parts of the power tool for damage
at regular intervals and check that all controls operate
faultlessly.
8.3 Checking the power tool after care and
After carrying out care and maintenance work on the
power tool, check that all protective and safety devices
are fitted and that they function faultlessly.
Possible cause
Interruption in the electric supply.
The supply cord or plug is defective.
The carbon brushes are worn.
The electronic restart interlock is ac-
tivated after an interruption in the
electric supply.
The extension cord's conductor cross
section is inadequate.
Malfunction in the ATC system.
maintenance
Remedy
Plug in another electric appliance and
check whether it works.
Have it checked by a trained electrical
specialist and replaced if necessary.
Have it checked by a trained electrical
specialist and replaced if necessary.
Switch the power tool off and on
again.
Use an extension cord with an ad-
equate conductor cross section.
If necessary, the power tool should be
repaired by Hilti Service.