Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5) Battery tool use and care
a) Make sure that the power switch is set to OFF before the battery is inserted.
Attaching a battery to a power tool when the power switch set to ON increases
the risk of an accident occurring.
b) Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
c) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
d) When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
e) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Safety instructions specific to sanders
•
Always wear a dust mask when sanding.
•
Extra caution should be taken when sanding lead paint, wood, metal or other
materials which produce toxic dust. Make sure any bystanders in the work area
are well protected.
•
Bear in mind that dust caused by sanding can be very flammable when mixed with air.
5
Werbung
