AL-KO 32 E Bedienungsanleitung Seite 13

English
Operating times for petrol lawnmowers
(in compliance with the Control of Pollution Act).
Please also observe the municipal regulations
on the operation of lawn mowers!
Monday – Saturday
17.00 – 12.00
15.00 – 19.00
Assembly
Assemble this unit in accordance with the
separately enclosed assembly manual.
Protection of the environment, disposal
The packaging material is made of recyclable
materials. Dispose of packaging materials
in accordance with regulations.
Switching on the unit
Do not switch on the unit until it has been
completely assembled.
The numeral printed on the left before the
"
i
text (e.g. ) refers to the diagrams.
Always comply with the petrol engine operating
manual supplied by the engine manufacturer.
Before switching on the machine for the first
time, fill up with oil and petrol!
Petrol: Standard petrol – lead-free
Engine oil: See operating manual supplied by the
engine manufacturer.
Filling up with petrol: The tank cover is situated
on the petrol tank and is identified by the symbol
"petrol pump" (petrol station).
Filling up with oil: Capacity approx. 0.6 litres
Engine without dipstick:
Fill up to the upper edge of the inlet nozzle.
Engine with dipstick:
Fill up to the mark between "FULL" and "ADD"
on the dipstick.
The oil level is checked with the dipstick screwed
in.
Starting the engine
The engine cannot be started until the blade has
been attached (balance weight)!
Not allowed on Sundays
and bank holidays!
Starting the engine manually
a) Without throttle remote control
!Ã
Press the primer button 3x at intervals
of approx. 2 seconds.
At temperatures below 10 °C press the primer
button 5x.
If the engine is warm, do not press the primer
button!
"Ã
Pull the engine brake handle towards the
upper handle and hold in position – the engine
brake handle does not lock into position.
#Ã
Quickly pull out the starter cable and then let
it slowly wind up again.
The engine has a fixed throttle setting.
i
Speed control is therefore not possible.
b) With throttle remote control
Ã
Throttle to
!Ã
Press the primer button 3x at intervals of
approx. 2 seconds.
At temperatures below 10 °C press the primer
button 5x.
If the engine is warm, do not press the primer
button!
"Ã
Pull the engine brake handle towards the
upper handle and hold in position – the engine
brake handle does not lock into position.
#Ã
Quickly pull out the starter cable and then let
it slowly wind up again.
As soon as the engine is running, position the
throttle between
according to the desired engine speed.
Starting the engine electrically
$Ã
Throttle to
%Ã
Press the primer button 3x at intervals
of approx. 2 seconds.
At temperatures below 10 °C press the primer
button 5x.
If the engine is warm, do not press the primer
button!
&Ã
Pull the engine brake handle towards the
upper handle and hold in position – the engine
brake handle does not lock into position.
'Ã
Turn the ignition key in the ignition lock all
the way to the right – when the engine is running,
release the ignition key.
The ignition key moves back to position "0".
Position the throttle between
Petrol lawnmower
position (start)
(start) and (stop)
position (start )
(start) and
en-3