Agilent Technologies Turbo-V 300HT PCB Bedienungshandbuch Seite 207

Turbo-V 300HT PCB Controller description
The controller (model 969-9870) is a solid-state frequency converter
which is driven by a single chip microcomputer and is composed of a
PCB which includes power supply and 3-phase output, analog and
input/output section, microprocessor and digital section. The power
supply converts the single phase (50-60 Hz) AC mains supply into a
3-phase, low voltage, medium frequency output which is required to
power the Turbo-V pump. The microcomputer generates the variable
output frequency and controls the 3-phase output voltage according
to the software and the gas load condition of the pump.
Moreover, it manages signals from sensors, input/ output connection
information to be displayed, and gives outputs for a fully automatic
operation. A dedicated EEPROM is used to store pump operating
parameters and the input/output programmed information upon
failure. The controller can be operated via remote signals through
input/output connectors.
The following figure is a picture of the Turbo-V controller.
Figure 5
Turbo-V 300HT PCB Controller User Manual / 87-900-884-01 (F)
Turbo-V 300HT PCB Controller description
Turbo-V 300HT PCB Controller
Technical Information
207/260
17