Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*Defective switch, motor or cord-
consult an electrician.
*Overload has reacted-
Wait and reset overload cut-off.
Sanding belt slips
*Sanding belt is stretched-
install new sanding belt.
*Too much applied pressure
move workpiece while sanding.
Machine vibrates excessively
*Stand on uneven floor-
adjust stand for even support.
*motor mounts are loose-
tighten motor mount bolts.
Abrasive belt keeps tearing
*Belt is running the wrong direction-
observe arrow on the sanding belt
Sanded edge not square
*Table not square to sanding platen-
Adjust positive stop for 90°.
Sanding marks on the wood
*Workpiece was held still-
keep workpiece moving.
*Wrong grit sanding belt-
use coarser grit for stock removal
and fine grit for finish sanding.
*Feed pressure too high-
never force the wood.
10. Environmental protection
Protect the environment.
Your appliance contains valuable
materials which can be recovered or
recycled. Please leave it at a
specialized institution.
11. Available accessories
Refer to the JET-Pricelist
for various grit sanding belts.
8
Werbung
Inhaltsverzeichnis
