Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
ACCESSORIES
Upholstery Nozzle
The upholstery nozzle (11) is suitable,
for example, for upholstered furniture,
mattresses or car seats.
Crevice Nozzle
The crevice nozzle (13) is ideal for places
that are hard to get to, such as corners,
crevices or recesses.
Brush Attachment, Flat
The flat brush attachment (14) is suitable
for dusting delicate objects such as picture
frames, lamp shades, keyboards, books, etc.
The attachment is simply plugged directly
onto the crevice nozzle.
Blower Nozzle
The blower nozzle (12) is suitable for blow-
ing out delicate objects such as keyboards.
It can also be used to fill small objects such
as balloons or buoyancy aids with air.
Brush Attachment, Round
The round brush attachment (15) can be
used to dislodge dirt to make it easier to
blow off the surface.
The attachment is plugged directly onto
the blower nozzle.
14
ATTACHING / DETACHING
ACCESSORIES
Collecting Container
Attaching:
1. Place the EPA filter (3) inside the collect-
ing container (2) and check that it fits
securely.
2. Place the collecting container on the
motor unit. When you do this, align the
locking lugs on the motor unit and the
recesses in the collecting container.
3. Twist the collecting container as far as
it will go clockwise.
Detaching: Twist the collecting container (2)
anticlockwise and detach it from the motor
unit (4).
Nozzles
Attaching a suction nozzle: Slide one of
the suction nozzles (11, 13) as far as it will
go into the suction opening (1) (Picture C).
Attaching the blower nozzle: Slide the
blower nozzle (12) as far as it will go into
the air outlet (5) (Picture D).
Detaching: Pull the nozzle off the device.
Brush Attachments
Attaching:
•
Slide the flat brush attachment (14) onto
the flat end of the crevice nozzle (13).
•
Slide the round brush attachment (15)
onto the narrow end of the blower
nozzle (12).
Detaching: Pull the brush attachment off
the nozzle.
Werbung
