Display Settings - JVC KD-R889BT Bedienungsanleitung

AUDIO SETTINGS
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
* 1
Before making an adjustment, select the speaker:
When 2-way crossover is selected:
FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER
– [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] is selectable only if a setting other than
[NONE] is selected for [REAR] or [SUBWOOFER] of [SPEAKER SIZE]. ( 22)
When 3-way crossover is selected:
TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER
– [WOOFER] is selectable only if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE]. ( 23)
*
2
Displayed only when [X ' OVER TYPE ] is set to [2-WAY] ( 20) and if a setting other than
[NONE] is selected for [REAR] of [SPEAKER SIZE]. ( 22)
24
ENGLISH
If you specify the distance from the center of the
currently set listening position to every speaker, the
delay time will be automatically computed and set.
1 Determine the center of the currently set listening
position as the reference point.
2 Measure the distances from the reference point to
the speakers.
3 Calculate the differences between the distance
of the furthest speaker (rear speaker) and other
speakers.
4 Set the [DISTANCE] calculated in step
individual speakers.
5 Adjust [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the
listening position

DISPLAY SETTINGS

KD-R981BT:
KD-R784BT/KD-R782BT:
3
for
KD-R889BT/KD-R881BT:
Symbolic button
1
Press and hold
2
KD-R981BT/KD-R784BT/KD-R782BT: Turn the volume knob to select
KD-R889BT/KD-R881BT:
3 2
Repeat step
follow the instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
.
an item ( 25), then press the
knob.
Press
( 25), then press
until the desired item is selected/activated or
to select an item
.
.