Herunterladen Inhalt Inhalt Diese Seite drucken

JVC KD-R889BT Bedienungsanleitung Seite 26

Cd receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

AUDIO SETTINGS
Crossover settings
Below are the available setting items for 2-way crossover and 3-way
crossover.
Caution
Select a crossover type according to how the speakers are connected.
( 32)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
SPEAKER SIZE
Selects according to the connected speaker size for optimum
performance.
• The frequency and slope settings are automatically set for the
crossover of the selected speaker.
• When 2-way crossover is selected, if [NONE] is selected for [TWEETER]
of [FRONT], [REAR] and [SUBWOOFER] for [SPEAKER SIZE], the [X ' OVER]
setting of the selected speaker is not available.
• When 3-way crossover is selected, if [NONE] is selected for [WOOFER]
of [SPEAKER SIZE], the [X'OVER] setting of [WOOFER] is not available.
X ' OVER (crossover)
• [FRQ]/[F-HPF FRQ]/[R-HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]/[LPF FRQ]: Adjusts
the crossover frequency for the selected speakers (high pass filter or
low pass filter).
If [THROUGH] is selected, all signals are sent to the selected speakers.
• [SLOPE]/[F-HPF SLOPE]/[R-HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE]/
[LPF SLOPE]: Adjusts the crossover slope.
Selectable only if a setting other than [THROUGH] is selected for the
crossover frequency.
• [SW LPF PHASE]/[PHASE]: Selects the phase of the speaker output to be
in line with the other speaker output.
• [GAIN LEFT]/[GAIN RIGHT]/[F-HPF GAIN]/[R-HPF GAIN]/[SW LPF GAIN]/[GAIN]:
Adjusts the output volume of the selected speaker.
22
ENGLISH
2-way crossover setting items
SPEAKER SIZE
FRONT
SIZE
TWEETER
REAR *
1
8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/
7×10/NONE (not connected)
SUBWOOFER *
*
2
3
16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected)
X ' OVER
TWEETER
FRQ
GAIN LEFT
GAIN RIGHT
FRONT HPF
F-HPF FRQ
F-HPF SLOPE
F-HPF GAIN
REAR HPF *
1
R-HPF FRQ
R-HPF SLOPE
R-HPF GAIN
SUBWOOFER
SW LPF FRQ
LPF *
2
*
3
SW LPF SLOPE –06DB/–12DB/–18DB/–24DB
SW LPF PHASE REVERSE (180°)/ NORMAL (0°)
SW LPF GAIN
*
1
, *
2
, *
3
: ( 23)
8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/
5×7/6×8/6×9/7×10
SMALL/MIDDLE/LARGE/NONE (not connected)
1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/
10KHZ/12.5KHZ
–08DB to 00DB
–08DB to 00DB
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/
120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH
–06DB/–12DB/–18DB/–24DB
–08DB to 00DB
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/
120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH
–06DB/–12DB/–18DB/–24DB
–08DB to 00DB
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/
120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH
–08DB to 00DB

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Kd-r981btKd-r784btKd-r782btKd-r881bt

Inhaltsverzeichnis