Auto Answer; Phone Book - JVC KD-R889BT Bedienungsanleitung

BLUETOOTH®
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2
KD-R981BT/KD-R784BT/KD-R782BT:
Turn the volume knob to select an item (see the
following table), then press the knob.
KD-R889BT/KD-R881BT:
Press to select an item (see the following
table), then press
3 Repeat step 2 until the desired item is selected or
activated.
To return to the previous setting item, press
SETTINGS

AUTO ANSWER

01 SEC to 30 SEC: The unit answers incoming call
automatically in the selected time (in seconds). ;
OFF: Cancels.
RING COLOR KD-R981BT/KD-R889BT/KD-R881BT:
COLOR 01 to COLOR 49 (COLOR 08): Selects the
illumination color for the buttons or symbolic button
as notification when there is an incoming call and
during a call. ; OFF: Cancels.
RING ILLUMI KD-R784BT/KD-R782BT:
BLINK 01 to BLINK 05 (BLINK 02): Selects the
blinking pattern for the buttons as notification when
there is an incoming call. ; OFF: Cancels.
14
ENGLISH
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call by voice
is also possible if your mobile phone has the feature.
1
.
2
.
Default: XX
3
To return to the previous setting item, press
RECENT CALL
PHONEBOOK
Press to enter Bluetooth mode.
"(First device name)" appears.
• If two Bluetooth phones are connected, press
phone.
"(Second device name)" appears.
KD-R981BT/KD-R784BT/KD-R782BT: Turn the volume knob to select an item (see the
KD-R889BT/KD-R881BT:
2
Repeat step until the desired item is selected/activated or follow the instructions
stated on the selected item.
(Applicable only if the phone supports PBAP.)
1 Press the volume knob (for KD-R981BT/KD-R784BT/KD-R782BT) or
KD-R889BT/KD-R881BT) to select a name or a phone number.
• "<" indicates call received, ">" indicates call made, "M" indicates call missed.
• "NO HISTORY" appears if there is no recorded call history or call number.
2 Press the volume knob (for KD-R981BT/KD-R784BT/KD-R782BT) or
KD-R889BT/KD-R881BT) to call.
(Applicable only if the phone supports PBAP.)
1 Press
to select the desired letter (A to Z, 0 to 9, and OTHERS).
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
KD-R981BT/KD-R784BT/KD-R782BT:
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
KD-R889BT/KD-R881BT:
2 Press to select a name, then press
3 Press to select a phone number, then press
• The phonebook of the connected phone is automatically transferred to the unit when pairing.
• This unit can display only non-accent letters. (Accent letters such as "Ú" is showns as "U".)
again to switch to another
following table), then press the knob.
Press to select an item (see the following
table), then press .
.
(for
(for
.
to call.