JVC KD-R889BT Bedienungsanleitung Seite 21

BLUETOOTH®
After pairing is successful, "PAIRING OK"
appears and Bluetooth compatibility check starts.
If "CONNECT NOW USING PHONE" appears, operate the
Bluetooth device to allow phonebook access to continue.
"TESTING" flashes on the display.
The connectivity result flashes on the display.
"PAIRING OK" and/or "HANDS-FREE OK" *
"AUD.STREAM OK" * 2 and/or "PBAP OK" *
* 1
Compatible with Hands-Free Profile (HFP)
*
2
Compatible with Advanced Audio Distribution Profile (A2DP)
*
3
Compatible with Phonebook Access profile (PBAP)
After 30 seconds, "PAIRING DELETED" appears to indicate
that pairing has been deleted, and the unit exits check
mode.
• To cancel, press and hold
KD-R784BT/KD-R782BT) or
to turn off the power, then turn on the power again.
"[Device Name]" BLUETOOTH — Audio
While in BT AUDIO source,
you can connect to five
Bluetooth audio devices
and switch between these
five devices.
1
and/or
3
: Compatible
(for KD-R981BT/
(for KD-R889BT/KD-R881BT)
1
2
To
Playback/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
KD-R981BT/KD-R784BT/KD-R782BT:
KD-R889BT/KD-R881BT:
Audio player via Bluetooth
Press (for KD-R981BT/KD-R784BT/KD-R782BT) or
KD-R881BT) repeatedly to select BT AUDIO.
• KD-R889BT/KD-R881BT: Pressing
Operate the Bluetooth audio player to start playback.
On the faceplate
KD-R981BT/KD-R784BT/KD-R782BT: Press the volume knob.
KD-R889BT/KD-R881BT:
Press
Press
Press and hold
Press
TRACK REPEAT, ALL REPEAT, REPEAT OFF
(for KD-R889BT/
enters BT AUDIO directly.
Press
.
.
.
repeatedly.
.
17
ENGLISH