JVC KD-R889BT Bedienungsanleitung Seite 17

BLUETOOTH®
The following operations may differ or not available depending on the connected phone.
To
First incoming call...
Answer a call
Reject a call
End a call
While talking on the first incoming call...
Answer another incoming
call and hold the current call
Reject another incoming call Press and hold
While having two active calls...
End current call and activate
held call
Swap between the current
call and held call
Adjust the phone volume * 1
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes * 2
* 1
This adjustment will not affect the volume of the other sources.
* 2
Operations may vary according to the connected Bluetooth device.
On the faceplate
KD-R981BT/KD-R784BT/KD-R782BT
Press or the volume knob.
Press and hold or the
volume knob.
Press and hold or the
volume knob.
Press or the volume knob.
or the
volume knob.
Press and hold or the
volume knob.
Press .
Turn the volume knob during
a call.
Press during a call.
KD-R889BT/KD-R881BT
Press or .
Press and hold or
Press and hold or
Press or
Press and hold or
.
Press and hold or
.
Press .
Press during a call.
Press during a call.
Improve the voice quality
While talking on the phone....
1
Press and hold .
2
KD-R981BT/KD-R784BT/KD-R782BT:
Turn the volume knob to select an item
(see the following table), then press the
knob.
KD-R889BT/KD-R881BT:
Press to select an item (see the
following table), then press
3 2
Repeat step until the desired item is
selected or activated.
4
Press to exit.
To return to the previous setting item, press
.
MIC GAIN LEVEL –10 to LEVEL +10 (LEVEL –04): The
sensitivity of the microphone increases as the
number increased.
NR LEVEL LEVEL –05 to LEVEL +05 (LEVEL 00):
Adjust the noise reduction level until the
least noise is being heard during a phone
conversation.
ECHO LEVEL –05 to LEVEL +05 (LEVEL 00):
CANCEL Adjust the echo cancellation delay time until
the least echo is being heard during a phone
conversation.
ENGLISH
.
Default: XX
13