JVC KD-R889BT Bedienungsanleitung Seite 19

BLUETOOTH®
DIAL NUMBER KD-R981BT/KD-R784BT/KD-R782BT:
1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2 Press
1
Repeat steps and
3 Press the volume knob to call.
KD-R889BT/KD-R881BT:
1 Press
2 Press
1
Repeat steps and
3 Press
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions. ( Make a call using voice recognition)
Make a call using voice recognition
1
Press and hold to activate the connected phone.
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
to move the entry position.
2
until you finish entering the phone number.
to select a number (0 to 9) or character ( , #, +).
to move the entry position.
2
until you finish entering the phone number.
to call.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
/ /
KD-R981BT KD-R784BT KD-R782BT
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL], [PHONEBOOK] or
[DIAL NUMBER], then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold one of the number buttons (1 to 6).
"MEMORY P(selected preset number)" appears when the contact is
stored.
/ :
KD-R889BT KD-R881BT
1 Press to enter Bluetooth mode.
2 Press to select [RECENT CALL], [PHONEBOOK] or [DIAL NUMBER],
then press .
3 Press to select a contact or enter a phone number.
If a contact is selected, press
4 Press and hold one of the number buttons (1 to 6).
"MEMORY P(selected preset number)" appears when the contact is
stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in step
and store a blank number.
Make a call from memory
1
Press to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob (for KD-R981BT/KD-R784BT/KD-R782BT) or
(for KD-R889BT/KD-R881BT) to call.
"NO PRESET" appears if there is no contact stored.
:
to show the phone number.
ENGLISH
2
15